Setting Individual Forward No Answer Timers - Samsung DCS Manual

ACTION
1. Press TRSF 102
Display shows
2. Dial station number (eg., 205)
OR
Press UP or DOWN to select station
Press RIGHT soft key to move cursor
3. Dial 0–5 to select forward type OR
Press UP or DOWN to select forward
type
Press RIGHT soft key to move cursor
4. Dial destination number (eg., 201) OR
Press UP or DOWN to select destination
Press RIGHT soft key to move cursor
5. Dial 1 for YES, 0 for NO OR
Press UP or DOWN to select YES or
NO and Press RIGHT soft key to
return to step 2
6. Press TRSF to store and exit
OR Press SPEAKER to store and
advance to next program

3.17 SETTING INDIVIDUAL FORWARD NO ANSWER TIMERS

Each station can have an individual call Forward No Answer timer to accommodate station users with
different individual work habits. When adjusting this timer, take care that the value is not greater than the
transfer recall timer. The range is 000 - 250 seconds.
PROGRAM KEYS
KEYPAD - Used to set timer values.
UP & DOWN - Used to select extension number.
ANS/RLS - Save data and advance to next PROGRAM.
Open customer programming and follow the instructions below.
ACTION
1. Press TRSF 502
Display shows
2. Dial the station number (eg. 205) OR
press UP or DOWN to select the station
and press the RIGHT soft key to move
the cursor OR press ANS/RLS to select
all stations
3. Enter the new value via the dial pad (eg.
Page 15
DISPLAY
[201] FORWARD
0 : FORWARD CANCEL
[205] FORWARD
0 : FORWARD CANCEL
[205] FORWARD
1 : ALL CALL : NONE
[205] FORWARD
1 : ALL CALL : 201
[205] FORWARD
CURRENTLY SET : YES
DISPLAY
[201] NO ANS FWD
010 SEC
[205] NO ANS FWD
010 SEC_
[ALL] NO ANS FWD
010 SEC_
[205] NO ANS FWD