Table of Contents
Advertisement
Fitting
Your server is equipped with a tray and a blanking plate for each empty
drive bay.
1.
Remove the blanking plate, if necessary, from the drive tray. The
plate is attached via two screws on the underside of the tray.
2.
Fasten the drive onto a drive tray using the four securing screws as
shown:
1
2
Figure 4-24 Refitting the Removable Drive Tray
1.
Drive Tray
2.
Drive Assembly
S e r v i c e I n f o r m a t i o n
3
C O M P
A C T
3.
Securing Screws
OWNER'S HANDBOOK 4-23
Advertisement
Table of Contents
