Mitsubishi Electric Apricot Owner's Handbook Manual page 34

U p g r a d i n g Y o u r S y s t e m
Installing CPU and Memory Cards
Important Note
The procedures explained in this section are for authorized engineers only.
There are four slots reserved for memory and CPU cards. They are
located on the motherboard towards the top of the electronics chamber.
To gain access to the slots, remove the protective metal plate which
covers the upper part of the electronics chamber.
1. Remove the securing screws as shown in the following diagram:
1
Figure 3-3 Protective Metal Plate
1. Protective Metal Plate
2. Lift the metal plate away from the metalwork.
3-4 OWNER'S HANDBOOK
2
2. Securing Screws