Table of Contents
Advertisement
Front Bezel
Removing
1.
Ensure that the removable media drive bay door is close and locked.
SH-18
2.
On each side of the server, remove the protective metal plates which
cover the removable media drives and the electronics chamber.
3.
Remove the hard disk drive module closest to the front of the
machine (Module A).
4.
Remove eight screws, four on each side of the machine, and slide
the bezel away from the chassis as shown in the following diagram:
1
Figure 4-12 Removing Front Bezel
1.
Front Bezel
2.
Front Panel System
Controller Connector
5.
The front panel is attached to the bezel and comes away from the
chassis at the same time. Since there is a ribbon cable attached to the
front panel, remove the bezel with care.
S e r v i c e I n f o r m a t i o n
2
COMPAC
T
Cass ette
Drive
Open /Clos
e
SL O T-
4
DC
Write Prote
ct
Step
3.
Securing Screws (x 8)
OWNER'S HANDBOOK 4-13
3
Advertisement
Table of Contents
