Table of Contents
Advertisement
S e r v i c e I n f o r m a t i o n
3.
Now reach inside the module and push on the power circuit board
on the backplane to ensure that its connector is seated properly into
the power socket on the centre spine. The power circuit board lies
in the centre of the backplane in each module as shown in the
following diagram:
1
Figure 4-9 Seating Power Connector
1.
Power Circuit Board (from
inside module)
2.
Power Socket on Centre Spine
4-10 OWNER'S HANDBOOK
2
3.
Power Circuit Board (from
rear of module)
3
Advertisement
Table of Contents
