Table of Contents
Advertisement
Power Control Jumper J9C3
This jumper (PWR CLR) enables power supply maintenance voltage
control using the RTC.
To disable the RTC power control, do this:
1.
Remove the side cover and the ECC memory module from slot
MEM 2 as described in Chapter 4, Service Information.
2.
Move the power control jumper from enable to disable.
3.
Replace the ECC memory module and side panel.
T e c h n i c a l I n f o r m a t i o n
OWNER'S HANDBOOK 5-19
Advertisement
Table of Contents
