GE NX-10 Installer Manual page 80

Location Term
2.5.1.2.1.1 Quick Arm
2.5.1.2.1.2 Re-exit
2.5.1.2.1.3 Silent Auto Arm
2.5.1.2.1.4 Automatic Instant
2.5.1.2.1.5 Final Set Door
2.5.1.2.1.6 Instant Night
2.5.1.2.1.7 Instant Stay Toggle
2.5.1.2.1.8 Arm with Tamper Mem/FTC
2.5.1.2.1.9 Arm with Low Battery
Definition
A menu option that enables the function keys for part
arming and for full arming. These options work on a single-
partition keypad only. If the Quick Arm menu option is
enabled, the user can arm the system by simply pressing
the Arm Away, Arm Stay or Night Mode button, otherwise it
is necessary to enter the user code first. (To arm a system
in the Away mode with a single-partition keypad it is
enough to enter the user code).
A menu option that enables the exit delay without
disarming the partition.
The exit delay can be restarted if in arm stay mode by
using the Arm Away command in the user menu or by
pressing a function key programmed by the installer to
activate arm away.
A menu option that arms the partition automatically at a
preset time without the keypad buzzer sounding.
A menu option that enables the automatic instant feature
of entry zones.
If no exit is detected (the entry/exit zone is not opened and
closed) after the partition is armed, the entry delay timer is
cancelled, creating an instant zone. If the exit is detected
(the user leaves the premises after arming the partition),
the entry timer stays active, creating an entry delay.
A menu option applicable for secondary entry/exit zones
only (zones with Delay 2 option set).
If the final set door option is enabled, the exit time will
immediately expire as soon as the secondary entry/exit
zone becomes ready again (the door is opened and closed
when the user leaves the premises). This feature can only
be used in combination with magnetic door contacts.
A menu option that enables the instant Night mode
selection from the keypad (no toggle). In this mode, the
control panel will bypass all zones that have the Entry
Guard feature enabled, and the partition will be armed
without an exit delay. The partition must be disarmed to
cancel this mode.
A menu option that enables a toggled setting of the Arm
Stay (F4) function key (toggling between Stay and Instant
mode for a partition). When this option is enabled, pressing
the F4 key once arms the system in the Stay mode.
Subsequently pressing the F4 key toggles the armed
partition between the Stay mode and the Instant mode.
When this option is disabled, toggling with the F4 key does
not work, and the F4 key can be used for arming the
system in the Stay mode only.
Note: In the master mode you can toggle only a single
partition at the time.
A menu option that allows to arm the partition even if
previous tamper alarm indicators and/or Failed To
Communicate events have not been cleared from memory.
A menu option that allows to arm the partition even if the
Battery Low event has been triggered.