Configuring Partitions; Setting Timers; Configuring A Partition - GE NX-10 Installer Manual

Configuring partitions

Figure 18. Partitions menu
(1) Partition 1
2.5.1 2.5.1.1
Partitions 2 - 4
Same as above
2.5.1.2
A partition is a group of zones which operate as a unit and can be armed and disarmed independently
of other partitions in the system. A partition is also known as an area. The control panel can be
divided into separate partitions with distinct zones, keypad and user codes for each partition. Arming
and bypass options can be set for each partition. To program partition settings, select Installer
Menu>Control Panel>Partition Settings.

Setting timers

You can specify the time in which a user must disarm or arm a system before a full alarm occurs. The
following example sets time within which the user must disarm the system (10 seconds). It also sets
the time within which the user must leave the protected zone after arming the system (12 seconds).
Navigate with the
1.
Settings>Partition 1>Timers>Entry 1 and press OK.
Enter 10 and press OK.
2.
The keypad beeps once to confirm the change and returns to Entry 1.
3.
Scroll to Exit 1 and press OK.
4.
Enter 12 and press OK.
5.
The keypad beeps once to confirm the change and returns to Exit 1.
6.

Configuring a partition

You can set partition features including arming and bypassing options. You can also enable life
safety keys for the partition keypads. The following example allows the system to be armed silently
Entry
Timers 2.5.1.1.1
Exit
2.5.1.1.2
Entry
2.5.1.1.3
Exit
2.5.1.1.4
Feature Select Arming
2.5.1.2.1
2.5.1.2.2 Keypads
Bypass
2.5.1.2.3
Miscellaneous
2.5.1.2.4
keys to Control Panel>Partition
Time 1
Time 1
Time 2
Time 2
Quick Arm
2.5.1.2.1.1
Re-exit
2.5.1.2.1.2
Silent Auto Arm
2.5.1.2.1.3
Autom. Instant
2.5.1.2.1.4
Final Set Door
2.5.1.2.1.5
Instant Night
2.5.1.2.1.6
Instant Stay Toggle
2.5.1.2.1.7
Arm with Tamper Mem/FTC
2.5.1.2.1.8
Arm with Low Battery
2.5.1.2.1.9
Keyswitch Arm STAY
2.5.1.2.1.10
Late to Close/Early to Open
2.5.1.2.1.11
Auto Arm in Stay Mode
2.5.1.2.1.12
Silent PA
2.5.1.2.2.1
Audible PA
2.5.1.2.2.2
Fire/Aux 1
2.5.1.2.2.3
Medical/Aux 2
2.5.1.2.2.4
Keypress
2.5.1.2.2.5
LED Extinguish
2.5.1.2.2.6
Auto Bypass
2.5.1.2.3.1
Code Required
2.5.1.2.3.2
Sounder Alert
2.5.1.2.3.3
Bypass Toggle
2.5.1.2.3.4
No Forced Bypass
2.5.1.2.3.5
Mains/Batt Sounder Alert
2.5.1.2.4.1
Tamper if Zone Lost
2.5.1.2.4.2
Tamper