Figure 3-3: Salt Container Release; Figure 3-4: Filling The Salt Using The Built In Funnel - Miele G1000 Technical Information

G1000 / G2000 Dishwashers
The Salt Reservoir holds approximately 4.5 lbs (2 kg) of salt
For models with salt reservoir located on the inner door
1. Open door and hold at an angle, so that the salt container can be
filled.
2. Open salt reservoir by pressing the button in the direction of the arrow
until the flap springs open - as shown in Figure 3-3.
3. Open the built in funnel, carefully fill with salt until water runs out.
4. Clean any excess and/or spilled salt.
5. Close the funnel and lid firmly.
6. Run the "Rinse & Hold" program to remove any traces of salt from
wash cabinet. Should the display shows "Insufficient salt", refill the salt after the
program has finished. Confirm with "OK". The
display.
The salt container holds approx. 2.2 lbs. (1 Kg) of salt.

Figure 3-3: Salt Container Release

Figure 3-4: Filling the Salt Using the Built In Funnel

message will clear from the
25
Technical Information
completely
inside the