Table 6-17: G2140 Program Mode Options (Continued On Table 6-18) - Miele G1000 Technical Information

Technical Information
Flashing
Rhythm of
Function Programming
Intake/Drain
Lt.
Pos. 0:
Long Short
Software
version ID
- -
check
Pos. 1:
Long Short
Reset
- 1
Pos 3:
Long Short
Dispensed
rinse aid
quantity
setting
- 3

Table 6-17: G2140 Program Mode Options (Continued on Table 6-18)

Do not press the The Rinse LED is off
Program button. or flashes. Shows
The Rinse & Hold the software version
LED is off. ID No., e.g. –769.
Press the The Rinse LED is off
Program button or flashes. This
once. The Rinse programmable
& Hold LED function can be used
flashes once to reset all
rapidly modifiable
intermittently. parameters (both
Press the customer and
Start/Stop button service
to reset all programming) to the
standard settings. standard settings.
The display shows P
and a digit
alternately: P0 =
Non-standard
settings have been
made; P1 = All
settings reset to
standard settings or
no modifications
have been made.
Press the The Rinse LED is off
Program button 3 or flashes: P3
times. The Rinse (standard setting)
& Hold LED indicates a
flashes 3 times dispensed quantity
rapidly of 3 ml. Setting
intermittently. range: 0 ml – 6 ml.
Press the
Start/Stop button
as appropriate to
make the desired
setting.
130
G1000 / G2000 Dishwashers
Flashing Rhythm of
Display
Sani-Wash Lt.
Long Short Display
-
Long Short Display
-
-
Long Short Display
-
1
2
3
4
5
6
- ID No.
- P0
1 P1
0 P0 (0 ml)
1 P1 (1 ml)
2 P2 (2ml)
3 P3 (3 ml)
4 P4 (4 ml)
5 P5 (5 ml)
6 P6 (6ml)