Table 6-8: G2020 Service Mode Options (Continued From Table 6-7) - Miele G1000 Technical Information

Technical Information
Control
Dial Function
Position
3 o'clock Component
test
5 o'clock Operating
hours
6 o'clock LED test

Table 6-8: G2020 Service Mode Options (continued from Table 6-7)

Save and quit
Switch off the unit.
Programming
Turn the control dial The flashing rhythm
to the 3 o'clock of the Rinse LED
position. To start indicates which
the component test, component test is
or to access the activated. For the
next component to sequence of
be tested, press the component testing
Start/Stop button. as well as
background
information and
access procedure,
refer to the
component test
information. Ref. to
6.2.1.3 For further
information.
Turn the control dial The flashing rhythm
to the 5 o'clock of the Rinse LED
position. To check shows the
for operating hours, registered
press the Start/Stop operating hours:
button. Each long flash
corresponds to
1000 hours and
each short flash
100 hours.
Turn the control dial All LEDs are lit.
to the 6 o'clock
position. To start
the control panel
test, press the
Start/Stop button.
114
G1000 / G2000 Dishwashers
Flashing Rhythm of
Display
Rinse LED
Long Short Display
-
-
-
-
-
-
-
-
-
-
1
1
1
1
1
Long Short Display
-
Long Short Display
-
- U0
1 U1
2 U2
3 U3
4 U4
5 U5
6 U6
7 U7
8 U8
9 U9
0 U10
1 U11
2 U12
3 U13
4 U14
- -
- -