Water Hardness Setting - Checking And Programming; Advanta Series; Advanta Series - G2020; G2020 - Programming Mode - Miele G1000 Technical Information

G1000 / G2000 Dishwashers
6.1.1 Water Hardness Setting – Checking and Programming
Access the programming mode.
The display shows P and the set value alternately. Setting range: P0 to P70 =
Water hardness.
E.g. P15 (standard setting) corresponds to 15 gr/gal, (15°d),
see Table 6-2.
(°d, degree of German hardness)
Sensor softener active (on certain models)
Without softener
Table 6-2: Water Hardness: Standard setting: 15 gr/gal (15 °d)
6.2

Advanta Series

6.2.1

Advanta Series - G2020

6.2.1.1

G2020 - Programming Mode

Accessing
1. Press and hold the Start/Stop button.
2. Switch on the machine.
3. Release the Start/Stop button.
4. Immediately press and release the Start/Stop button 5 times and at
time hold until the Start/Stop LED flashes rapidly.
5. Release the Start/Stop button
If the Start/Stop LED does not flash, repeat the procedure.
Water hardness
1°d
2°d
3°d
***
***
36°d
37 - 50°d
51 - 60°d
61 - 70°d
107
Technical Information
Grains per Gallon
Gr/gal
--
1
2
3
***
***
36
37 – 50
51 – 60
61 - 70
Display
P0
P1
P2
P3
***
***
P36
P50
P60
P70
the 5th