FRONT BRAKE
EAS00579
cC
Disc brake components rarely require disas-
sembly.
Therefore, always follow these preventive
measures:
99
Never disassemble brake components
unless absolutely necessary.
99
If any connection on the hydraulic brake
system is disconnected, the entire brake
system must be disassembled, drained,
cleaned, properly filled, and bled after
reassembly.
99
Never use solvents on internal brake com-
ponents.
99
Use only clean or new brake fluid for clean-
ing brake components.
99
Brake fluid may damage painted surfaces
and plastic parts. Therefore, always clean
up any spilt brake fluid immediately.
99
Avoid brake fluid coming into contact with
the eyes as it can cause serious injury.
FIRST AID FOR BRAKE FLUID ENTERING
THE EYES:
99
Flush with water for 15 minutes and get
immediate medical attention.
EAS00581
REPLACING THE FRONT BRAKE PADS
NOTE:
When replacing the brake pads, it is not neces-
sary to disconnect the brake hose or disassem-
ble the brake caliper.
1. Remove:
9 brake caliper bolts
9 brake caliper 1
1
7-17
http://www.motorcycle.in.th
CHAS