Event Setup - Samsung SPE-100 User Manual

setup screen

evenT SeTup

fTp / e-mail
You can configure the FTP / E-mail server settings so that you can transfer the images
stored in the network encoder to your PC if an event occurs.
1.
From the Setup menu, select the
<event (
2. Click <fTp / e-mail>.
3. Select <fTp configuration> or
<e-mail configuration> and enter /
select a desired value.
FTP configuration

- Server address : Enter the IP
address of the FTP server that you
transfer the alarm images to.
- User ID : Enter the user ID with
which you will log in to the FTP
server.
- Password : Enter the user account
password for logging into the FTP server.
- Upload directory : Specify the FTP path where you will transfer the alarm
images.
- Port : The default port of the FTP server is 21; however, you can use a different
port number according to the FTP server settings.
- Passive mode : Select <on> if you need to connect in passive mode due to the
firewall or the FTP server settings.
E-mail configuration

- Server address : Enter the IP address of the email server that you use for the
email transfer.
ex) SMTP. hotmail. com
- Use authentication : Select whether to use authorization.
- User ID : Enter the user ID for logging into the email server.
- Password : Enter the user account password for logging into the email server.
- Port : The default port of the email server is 25; however, you can use a different
port number according to the email server settings.
- Recipient : Enter the address of the email recipient.
- Sender : Enter the address of the email sender. If the sender address is incor-
rect, the email from the sender may be classified as SPAM by the email server
and thus may not be sent.
2_ setup screen
)> tab.