Audio Setup; Ptz Setup - Samsung SPE-100 User Manual

setup screen

Audio setup

You can configure the I/O settings of the audio source from the network encoder.
1.
From the Setup menu, select the
<Audio & video (
2. Click <Audio setup>.
3.
Adjust the audio I/O levels to your
preference.
Audio-In : Set the audio input value.

Audio-Out : Set the audio output

value.
4. When done, click [Apply (

pTZ setup

You can activate the zoom and set the zoom preset as you want.
1. Select the <Audio & video (
from Setup menu.
2. Click the <pTZ setup>.
3.
Set the preset and serial port.
Preset setup : Select a number out of

255 and click Move button to adjust
the camera to the angle defined by
the selected preset. However, you
can specify up to 128 presets for
Samsung-E protocols.
The connected camera should be
configured to allow serial port
communication.
Serial Setup : You can set the RS-485 communication mode of the connected

camera.
The camera and device are connected via RS-485 communication ports.
The camera will not perform properly if communication related settings of the connected camera
are incorrect.
4. When done, click [Apply (
_ setup screen
)> tab.
)].
)> tab
)].