Dynamic Ip Setup - Samsung SPE-100 User Manual

network connection and setup
3.
Enter the password.
This is the login password for the
"admin" user who accesses the
network encoder. The default password
is "4321".
4.
Click [oK].
Auto network setup will be completed.
5.
The network encoder will automati-
cally complete the network setting and
restart.

DynAmiC ip SeTup

Dynamic ip environment Setup
Example of the Dynamic IP environment

- If an IP router, with network encoders connected, is assigned an IP address by the
DHCP server
- If connecting the network encoder directly to modem using the DHCP protocols
- If IPs are assigned by the internal DHCP server via the LAN
Checking the Dynamic ip
1.
Run the IP Installer on the user's local
machine to display network encoders
allocated with <Dynamic ip> addresses
in the list.
2.
Select a network encoder in the list,
and click [manual Set] to check the
<Dynamic ip> of the network encoder.
If you uncheck <DHCp>, you can
change IP or <port> to <Static>.
0_ network connection and setup