setup screen
Installing the certificate
1.
Enter the certifi cate name.
2.
Select the certifi cate fi le to be installed and certifi cate key, and click [Install (
button.
Deleting the certificate
1.
Click [Delete (
EVENT SETUP
FTP / E-mail
You can configure the FTP / E-mail server settings so that you can transfer the images
stored in the network encoder to your PC if an event occurs.
1.
From the Setup menu, select the
<Event (
2.
Click <FTP / E-mail>.
3.
Select <FTP confi guration> or
<E-mail confi guration> and enter /
select a desired value.
FTP confi guration
-
Server address : Enter the IP
address of the FTP server that you
transfer the alarm images to.
-
User ID : Enter the user ID with
which you will log in to the FTP
server.
-
Password : Enter the user account
password for logging into the FTP server.
-
Upload directory : Specify the FTP path where you will transfer the alarm
images.
-
Port : The default port of the FTP server is 21; however, you can use a different
port number according to the FTP server settings.
-
Passive mode : Select <On> if you need to connect in passive mode due to the
fi rewall or the FTP server settings.
52_ setup screen
)] button.
)> tab.
)]