The Internet - Samsung SPE-100 User Manual

ConneCTinG To THe neTworK enCoDer from A
SHAreD LoCAL pC
1.
Run the IP Installer.
It will scan for connected network
encoders and display a list of them.
2.
Double-click a network encoder to ac-
cess.
The Internet browser starts and connects
to the network encoder.
Access to the network encoder can also be gained by typing the network encoder's IP address in
M
the address bar of the Internet browser.
ConneCTinG To THe neTworK enCoDer from A
remoTe pC viA THe inTerneT
Since using the IP Installer on a remote computer that is not in the IP Router's network cluster
is not allowed, users can access network encoders within an IP Router's network by using the
network encoder's DDNS URL.
1.
Before you can access a network encoder in the IP router network, you should have
set the port range forward for the IP router.
2.
From the remote PC, launch the Internet browser and type the DDNS URL address
of the network encoder, or the IP address of the IP router in the address bar.
ex) http://www.samsungipolis.com/[Product ID]
English _