Installation & Connection - Samsung SPE-100 User Manual

installation & connection
inSerTinG/removinG An SD memory CArD
inserting an SD memory Card
Push the SD memory card in the direction of the arrow shown in the diagram.
Do not insert the SD memory card while it's upside down by force. Otherwise, it may damage the
J
SD memory card.
removing an SD memory Card
Gently press down on the exposed end of the memory card as shown in the diagram to
eject the memory card from the slot.
Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from the
J
slot when released.
To remove the SD memory card, set <Record> to <Off> from <SD record> and press [Apply
(
If you have saved data in the SD memory card, removing the SD memory card prior to setting
record to OFF will cause damage to the data stored in the card.
If the SD memory is inserted, the SD LED indicator on the rear of the network encoder will turn on.
If there occurs a problem in the SD memory, the SD LED indicator will blink.
)]. (page 53)
English _1