Alarm Input - Samsung SPE-100 User Manual

setup screen
Pre-alarm duration : Specify the time point before the occurrence of the alarm;

starting from the time point, the images will be transferred. You can specify up to
5 seconds before the occurrence of the alarm.
Post-alarm duration : Specify the time point after the occurrence of the alarm; to

the specified time point, the images will be transferred. You can specify up to 120
seconds after the occurrence of the alarm.
4. When done, click [Apply (

Alarm input

You can set the alarm input type, activation time, and operation mode.
1.
From the Setup menu, select the
<event (
2. Click <Alarm input>.
3.
Specify an input device.
Type

- Normal Open : It is normally open,
but if it is closed, an alarm will be
triggered.
- Normal Close : It is normally
closed, but if it is open, an alarm
will be triggered.
4. Specify the <Activation time>.
Always : Always check if an alarm occurs. It activates in operated mode when the

alarm occurs.
Only scheduled time : Check if an alarm occurs at a specified day of the week for

a specified time period. It activates in operated mode when the alarm occurs.
5.
Specify an operation that will perform if an alarm occurs.
Alarm output : Specify the alarm output time in the alarm input setup.

E-mail sending : Specify the use of email transfer in the alarm input setup.

Record : Specify the use of recording in the alarm input setup.

Goto Preset : Moves to the specified preset location when setting the alarm input.

6. When done, click [Apply (
_ setup screen
)> tab.
)].
)].