Video Loss - Samsung SPE-100 User Manual

setup screen
Time schedule
You can configure so that an event will occur at a scheduled time regardless of the actual
occurrence of the event.
1.
From the Setup menu, select the
<event (
2. Click <Time schedule>.
To set the timer event
1. Set <Timer event setup> to <enable>.
2. Specify the <Activation time>.
Always : Always activates in operated

mode at the set interval.
Only scheduled time : Periodically

activates in operated mode at a
specified time and date.
3. Specify the <Transfer interval>.
4.
Specify the activation conditions.
FTP sending : Specify the use of the FTP transfer if an event occurs.

Record : Specify the use of recording if an event occurs.

5. When done, click [Apply (

video loss

You can set the alarm to be generated on a camera disconnection, which causes a video
loss.
1.
From the Setup menu, select the
<event (
2. Click <video loss>.
3. Specify the <video loss>.
Enable : Sets whether to activate

video loss detection.
4.
Set the activation time and condition.
Refer to the "Alarm input" for how

to set the <Activation time> and
<Action>. (page 54)
5. When done, click [Apply (
_ setup screen
)> tab.
)> tab.
)].
)].