Motion Detection - Samsung SPE-100 User Manual

motion detection

You can set target detection region and motion, as well as the alarm signal output.
1.
From the Setup menu, select the
<event ( )> tab.
2. Click <motion detection>.
3. Specify the <motion detection>.
Enable : Sets whether to activate

motion detection.
Sensitivity : Sets the sensitivity level

of the motion detection.
4.
Set the activation time and condition.
Refer to the "Alarm input" for how

to set the <Activation time> and
<Action>. (page 54)
5.
Select whether to display the mask area.
You can set maximum of 4 mask areas.
To set mask area, drag the desigred
area with mouse.
Motion detection is activated in the
mask area set.
To delete set area, click [Delete (
6. When done, click [Apply (
)] button.
)].
English _