Connecting The Network Encoder - Samsung SPE-100 User Manual

ConneCTinG THe neTworK enCoDer To An ip
rouTer wiTH THe pppoe/CABLe moDem
This is for a small network environment such as homes, SOHO and ordinary shops.
Network Encoder
Network Encoder
Local PC
Configuring the network settings of the local pC connected to an
ip router
Configuring the network settings of the local PC connected to an IP router, follow the
instructions below.
Select : <network neighborhood>  <properties>  <Local Area Connection>

 <properties>  <General>  <internet protocol (TCp/ip)>  <properties>
 <obtain an ip address automatically> or <use the following ip address>.
Follow the instructions below if you select <use the following ip address>:

ex1) If the address (LAN IP) of the IP router is 192.168.1.1
IP address : 192.168.1.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
ex2) If the address (LAN IP) of the IP router is 192.168.0.1
IP address : 192.168.0.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.0.1
ex3) If the address (LAN IP) of the IP router is 192.168.xxx.1
IP address : 192.168.xxx.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.xxx.1
For the address of the IP router, refer to the product's documentation.
M
Refer to the "Port Range Forward (Port Mapping) Setup" section of the IP Router's
documentation. (Page 31)
INTERNET
PPPoE or
IP Router
Cable Modem
DDNS Server
(Data Center, KOREA)
PPPoE or
External Remote
Cable Modem
PC
English _2