Table of Contents
Advertisement
network connection and setup
CONNECTING TO THE NETWORK ENCODER FROM A
SHARED LOCAL PC
1.
Run the IP Installer.
It will scan for connected network
encoders and display a list of them.
2.
Double-click a network encoder to ac-
cess.
The Internet browser starts and connects
to the network encoder.
M
Access to the network encoder can also be gained by typing the network encoder's IP address in
the address bar of the Internet browser.
CONNECTING TO THE NETWORK ENCODER FROM A
REMOTE PC VIA THE INTERNET
Since using the IP Installer on a remote computer that is not in the Broadband router's network
cluster is not allowed, users can access network encoders within a broadband router's network
by using the network encoder's DDNS URL.
1.
Before you can access a network encoder in the Broadband router network, you
should have set the port range forward for the Broadband router.
2.
From the remote PC, launch the Internet browser and type the DDNS URL address
of the network encoder, or the IP address of the Broadband router in the address
bar.
ex) http://www.samsungipolis.com/[Product Domain]
32_ network connection and setup
Advertisement
Table of Contents
