Dynamic Ip Setup - Samsung SPE-101 User Manual

network connection and setup
3. Enter the password.
This is the login password for the
"admin" user who accesses the
network video encoder. The default
password is "4321".

The default password can be exposed to a
hacking thread so it is recommended to
change the password after installing the
product.
Note that the security and other related
issues caused by the unchanged password
shall be responsible for the user.
4. Click [OK].
Auto network setup will be completed.

DYNAMIC IP SETUP

Dynamic IP Environment Setup
 Example of the Dynamic IP environment
- If a Broadband Router, with a network device connected, is assigned an IP address
by the DHCP server
- Network device is connected to a DHCP based modem directly
- If IPs are assigned by the internal DHCP server via the LAN
Checking the Dynamic IP
1. From a local PC, run <IP Installer> to
display a list of network devices that are
assigned <Dynamic IP>.
2. Select a network device in the list,
and click [Manual Set] to check the
<Dynamic IP> of the network device.
If you uncheck <DHCP>, you can
change IP to <Static>.
24_ network connection and setup