installation & connection
INSTALLATION
To install Blade (SPE-400B)
1.
Loosen the screws on either side of the cover in the Blade (SPE-400B) compartment for SPE-1600R.
2.
Fit Blade (SPE-400B) into both sliding lines as shown and insert it in the arrow direction.
3.
Insert Blade (SPE-400B) until the board fi ts into the connector of the rack, and tighten the screws.
M
In case of full installation 4 sets of BLADE (SPE-400B).
BLADE (SPE-400B) is sold separately (unbundled).
8_ installation & connection