Address Setting; Alarm Setting; A Alarm Input Setting (Alarm In) - Sanyo VCC-ZM400P Instruction Manual

OPTION SETTING
1
MAIN MENU
LANGUAGE SET
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET
LENS SET
MIRROR OFF
VIEW SETTING 1
OPTION SET

ADDRESS setting

1
Use the cursor button (j or l) to move the cursor to
SET for OPTION, then press the SET button.
The OPTION screen will appear.
Note: The PRESET ON setting cannot be used when OPTION
settings are in use.
2
Use the cursor button (j or l) to move the cursor to
ADDRESS, and then use the cursor button (d or c) to
select the address.
Available settings: 0 (d) – 127 (c)
To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
57
2
OPTION
‚ CONTROL
ADDRESS
ALARM
‚
‚
‚
‚

ALARM setting

A
Alarm input setting (ALARM IN)
485 ‚
0
SET ‚
Make the following settings for alarm detection.
Connect the external alarm switch to the alarm input terminal on
the back of the camera.
1
MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
1
Use the cursor button (j or l) to move the cursor to
SET for OPTION, then press the SET button.
The OPTION screen will appear.
Note: The PRESET ON setting cannot be used when OPTION
settings are in use.
2
Use the cursor button (j or l) to move the cursor to
SET for ALARM, then press the SET button.
The ALARM SETTING screen will appear.
3
Alarm input setting
Use the cursor button (j or l) to move the cursor to
ALM for ALARM IN, and then use the cursor button (d
or c) to set the input (e.g. ALM).
2
OPTION
SET ‚ CONTROL
OFF ADDRESS
INT ALARM
SET ‚
SET ‚
OFF
1 ‚
SET ‚
485 ‚
0
SET ‚