Sensitivity Setting - Sanyo VCC-ZM400P Instruction Manual

VIEW SETTING

SENSITIVITY setting

Set the degree of sensitivity for motion detection corresponding
to MOTION SIZE. Sensitivity can be set so that natural motions on
the screen such as wind and light changes will not be detected.
When this is necessary, activate the following setting.
MOTION SETTING
SIZE SET
MASKING ON
SENSITIVITY SET
ZOOM OFF
INTERVAL 5S
ALARM SIGN OFF
Use the cursor button (j or l) to move the cursor to
SENSITIVITY, and then use the cursor button (d or c) to
select SET. Then press the SET button.
The SENSITIVITY screen will appear.
When necessary, adjust the following settings.
Motion sensitivity (MOVE) setting
Use the cursor button (j or l) to move the cursor to
MOVE, then use the cursor button (d or c) to adjust the
movement value.
To avoid detection of small movements such as wind, make the
value larger.
Available settings: 1 – 10
Brightness level (Y-LEVEL)
Use the cursor button (j or l) to move the cursor to
Y-LEVEL, then use the cursor button (d or c) to adjust the
brightness level.
51
SENSITIVITY
‚
MOVE í---ú----ü
‚
Y-LEVEL í---ú----ü
‚ Y-DIFFER í---ú----ü
DURATION ú--------ü
DEMO
When noise from a dark screen is causing erroneous detections,
make the value larger.
Available settings: 1 – 10
Brightness differences (Y-DIFFER)
Use the cursor button (j or l) to move the cursor to
Y-DIFFER, then use the cursor button (d or c) to adjust the
brightness differences.
5
5
Changes in brightness can sometimes be mistakenly detected as
5
1
motion. To avoid detection of the turning on and off of lighting,
OFF
make the value larger.
Available settings: 1 – 10
DURATION setting
Use the cursor button (j or l) to move the cursor to
DURATION, then use the cursor button (d or c) to adjust
the detection time duration.
To avoid detecting fast movements, make the value larger.
Available settings: 1 – 60
Detected motion confirmation mode (DEMO)
Use the cursor button (j or l) to move the cursor to OFF for
DEMO, then use the cursor button (d or c) to change ON.
When a motion is detected, patterns are shown in that location.
While the detected motion is being confirmed, the SENSITIVITY
settings are optimized. This mode can only be activated in the
SENSITIVITY setting screen.
To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.