View Setting Item Flow - Sanyo VCC-ZM400P Instruction Manual

VIEW SETTING ITEM FLOW

MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION OFF
APERTURE ON ‚
GAMMA ON
PRESET OFF
MENU BACK
Setting the VIEW SETTING
Signifies that VIEW
SETTING 1 is the camera
setting 1. The cursor
button can be used (d or
c) to select one of the
nine VIEW SETTING
patterns (0 – 8).
33
A IRIS setting (See p35)
This setting allows selection of IRIS to either autoiris (AUTO) or manual iris (MANU). Default setting is
autoiris.
B WHITE BALANCE adjustment (See p42)
Three white balance methods are available: auto trace white balance (ATW), one-push automatic
white balance (AWC), and manual white balance (MWB). Default setting is auto trace white balance.
C Electronic SHUTTER setting (See p46)
This setting chooses either a fast shutter speed (SHORT) for target objects that may be moving quickly
A
or a slower shutter speed (LONG) for darker target objects.
B
D MOTION detector setting (See p48)
C
This function generates an alarm when a suspicious figure is detected. Each of the settings will enable
D
certain kinds of detection based on the natural image (swaying trees, flickers of light, etc.). It is also
E
possible to enable zooming in on target objects and intruders that have unusual brightness levels
F
(moving, bright) or are fast-moving.
E Profile compensation setting (APERTURE) (See p54)
This setting emphasizes the target object profile (horizontally or vertically).
F GAMMA correction setting (See p55)
This setting enables contrast sensitivity to be boosted by controlling the gamma characteristics. Three
gamma controls are available: gamma correction (ON), smart gamma correction 1 (SMART 1), and
smart gamma correction 2 (SMART 2). Default setting is ON.