View Setting; Airis Setting; Autoiris Setting (Auto) - Sanyo VCC-ZM400P Instruction Manual

VIEW SETTING

IRIS setting
A
There are 2 possible settings for IRIS, autoiris (AUTO) and manual iris (MANU).

Autoiris setting (AUTO)

Sets backlight compensation, magnification of electronic
sensitivity and iris level.
1
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW
SHUTTER OFF
MOTION OFF
APERTURE ON
GAMMA ON
PRESET OFF
MENU BACK
1
Use the cursor button (j or l) to move the cursor to
VIEW SETTING, then press the SET button. (e.g. 1)
The VIEW SETTING 1 screen will appear and AUTO for IRIS will
be blinking.
Available settings:
• AUTO: Sets automatic adjustment of iris.
• MANU: Sets manual adjustment of iris.
Note:
When AUTO is selected, the following 3 types of detailed
backlight compensation settings will be available.
• Multi-spot evaluative metering (MULT)
• 5 spot centerweighted average metering (CENT)
• 48 multi-spot metering (MASK)
35
‚
‚
2
Press the SET button.
The IRIS SETTING screen will appear.