Sanyo VCC-ZM400P Instruction Manual page 30

LENS SETTING (LENS)
2
D/N SETTING - B/W
AGC MAX GAIN +6·
DNR OFF
BURST OFF
FOCUS 1
PRESET OFF
MENU BACK
2
Use the cursor button (j or l) to move the cursor to
DAY/NIGHT, use the cursor button (d or c) to select
the level setting (e.g. B/W) and then press the SET
button.
The D/N SETTING – B/W screen will appear, and the "+6dB"
setting for "AGC MAX GAIN" will be blinking.
1 Sets the maximum AGC gain.
2 Sets the digital noise reduction.
3 Sets burst suppression. If other peripheral devices (such
as a multiplexer) are connected to the system, bursts
(distortion of image color) can occur when switching
between color and black & white. If this happens,
change the BURST setting to "ON".
4 Sets the focus when switching to black & white mode.
29
1
2
3
4
3
D/N SETTING - B/W
AGC MAX GAIN +6·
DNR OFF
BURST OFF
FOCUS 1
PRESET OFF
MENU BACK
3
AGC MAX GAIN setting
Use the cursor button (j or l) to move the cursor to
AGC MAX GAIN, and then use the cursor button (d or
c) to select the gain.
Available settings: Select the maximum AGC gain from OFF,
–6dB, ±0dB, +6dB, +9dB, +12dB or
+15dB.
Setting fixed gain manually
Set AGC MAX GAIN to "OFF" and then press the SET
button.
The GAIN SETTING screen will appear. You can use this screen
to set the gain value manually to within a range of 0 – 30 dB.
Note:
• If "OFF" is selected, no maximum gain will be set.
• If "OFF" is selected, the SENSE UP function will be forcibly set
to "OFF". However, the setting display will not change.