Sanyo VCC-ZM400P Instruction Manual page 20

LENS SETTING (LENS)
Setting the autofocus (AUTO)
Sets a limit for near distance focusing and sets focusing sensitivity and focus target area.
Note: As a normal practice, use manual focus when keeping the camera focused on the same target object for a long period of time
(over 24 hours). This can be used with the one-push autofocus function when needed (operated from the system controller). Long
periods of surveillance with the autofocus in operation will shorten the work life of the lens.
1
MAIN MENU
LANGUAGE SET
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET
LENS SET
MIRROR OFF
VIEW SETTING 1
OPTION SET
PRESET OFF
MENU END
1
Use the cursor button (j or l) to select SET for LENS,
then press the SET button.
The LENS screen will appear.
2
Use the cursor button (d or c) to select AUTO, then
press the SET button.
The FOCUS SETTING screen will appear.
3
LIMIT NEAR focus distance setting
Use the cursor button (j or l) to move the cursor to
LIMIT NEAR, then use the cursor button (d or c) to
change the distance value. (e.g. 3M)
Available settings: 1M (meter), 3M, 10C (centimeters), 30C,
Note: Focusing becomes difficult when near distance limit is set
to less than "1M".
19
2
LENS
‚ FOCUS
ZOOM
‚
‚
FOCUS SETTING
‚
‚
LIMIT NEAR
SENSITIVITY
AREA
50C
3
FOCUS SETTING
AUTO ‚ LIMIT NEAR
SENSITIVITY
SET ‚ AREA
1M
PRESET
HIGH
MENU
SET ‚
4
Setting focus SENSITIVITY
Use the cursor button (j or l) to move the cursor to
SENSITIVITY, then use the cursor button (d or c) to
change the setting. (e.g. LOW)
Available settings:
• HIGH: High sensitivity focusing
• LOW: Low sensitivity focusing
Note: When focus SENSITIVITY is set to HIGH, it may react to
even slight movements of the target object. In this case,
change the setting to LOW.
4
FOCUS SETTING
3M LIMIT NEAR
HIGH SENSITIVITY
SET ‚ AREA
OFF PRESET
BACK MENU
3M
LOW
SET ‚
OFF
BACK