Reinstall The Fender Assembly - Cub Cadet 3000 Series Service Manual

6. Line up the drive shaft with the new pump
adapter.
NOTE: If there is more than an 1/8" gap between
the drive shaft and pump adapter place the
spacer in between the the drive shaft and the
pump adapter. Do not force the spacer in if it
does not fit.
7. Install the new bolts through the drive shaft, pump
adapter, and the fan.
8. Finger tighten the shoulder nuts with the shoulder
facing the fan.
NOTE: The shoulder on the nuts fit into the fan
holes. See figure 9.
Shoulder Nuts
FIGURE 9.
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
9. Tighten the hex bolts and shoulder nuts securing
Shoulder Nut
FIGURE 10.

REINSTALL THE FENDER ASSEMBLY.

8 - 3
the pump adapter assembly, using a 7/16 wrench
and a 7/16 socket. See figure 10.
Cub Cadet 3000
7/16
Bolts