Cub Cadet 3000 Series Service Manual page 42

Center the centering springs and install the spring
retaining ring over the springs.
Figure 33.
Lubricate the spool assembly and install into the
sleeve, aligning the centering springs with the notches
machined in the sleeve.
Figure 34.
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Push the spool assembly into the sleeve until the cen-
tering springs are firmly positioned into the notches
located in the sleeve.
Figure 35.
Insert the cross pin into the spool/sleeve assembly.
Figure 36.
6 - 9
Cub Cadet 3000