Cub Cadet 3000 Series Service Manual page 45

Cub Cadet 3000
Lubricate and install both the o-ring seal and seal ring
into the gerotor star. Install the o-ring in the groove
located in the star first and then the seal ring.
Figure 45.
Lubricate and install the o-ring seal into the groove
located in the gerotors outer ring.
Figure 46.
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Prior to the installation of the end cap, freely lubricate
the gerotor star seal ring.
Figure 47.
Install the end cap onto the gerotor assembly by
aligning the cap screw holes.
Figure 48.
6 - 12