Initial Setup - Kenwood DNX9140 Instruction Manual

Initial Setup
DTurns the power ()n
D
Set each item
[Language] Select the language used for the
control screen and setting items. (page 68)
[Angle] You can adjust the position of the
monitor. (page 71)
[iPod AV Interface Use] Sets the terminal to
which the iPod is connected to. (~ "iPod")
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display.
((21
"OW')
"ON": Switches to the rear camera video
display when "Reverse" gear is engaged.
"OFF": Switches to the rear camera video
display when "Reverse" gear is engaged,
and then pressing the [AUD] button for
more than 1 second.
fhe function of the [AUD] button needs
to be set to "R-CAM" beforehand. See
<User Interface> (page 68).
[Color] Sets the screen and button illumination
color. (page 74)
[EXT SW] Setting up power specification of
the external device for which the power is
controlled from this unit. (page 71)
D
End initial setup
~
~
The settings above can be changed in <Setup Menu>
(page 66).
English 97