Kenwood DNX9140 Instruction Manual page 167

Thank you for choosing Kenwood's most advanced multimedia and navigation receiver, the
DNX9140. This product allows voice control for both navigation, internal sources and con-
nected sources. This guide will show you some of the more commonly used commands you
will be using on a regular basis. For more detailed information on voice commands please
refer to the Voice Command Table packaged with this product.
GETTING STARTED
It is important to not only use the correct words for voice control but to speak them clearly at
a time when there is minimal background noise. For best results have the microphone facing
the driver, operate with vehicle windows and sunroof closed and with only one person (driver)
talking while the unit is receiving the commands.
The Push to Talk (PTI) bunon
0 -
Pushing the PTI bunon will enter the user into
0
voice control mode as well as exit out of voice control mode.
TOP RIGHT CORNER VOICE CONTROL ICONS
A Green Icon
f)
means ready to receive a voice command and a •
Red/Brown" icon means the unit is not actively listening for a
voice command. It is critical that a command is given only when the
icon is green even if the confirming text may be seen on the screen
before the icon turns green.
After entering the voice control mode for
audio sources such as
i~,
Tuner, Satellite
or DVO/CD small green dots
will
appear next
to the GUI buttons that can be controlled by
a voice command.
e