Panel Color Coordinate - Kenwood DNX9140 Instruction Manual

Setup Menu
Panel Color Coordinate
Sets the button illumination color.
D
Display the Color screen
Touch [G]
> [,...] >
[Display]
>
[Color].
(page 66)
lEI
Display the Panel Color Coordinate screen
[Initialize] I nitialization resets the settings
made using the Panel Color to the default
settings made at the factory.
[Panel Color Scan] When set to "ON", the
illumination color of the screen and buttons
changes one after another.
D
Select a color
.~ O"'",*~~""rdlNt.
Adlus"
4P'
<.A _ " ' " ~ ~ _ _ , _ )
_ . .
Rldgevlew~~~~ ~
99999.99.,
[] Sets to the touched color.
[Adjust] Sets and registers favorite color to the
preset buttons ([P 1] - [P3]).
74 DNX9140/DDX814/DDX8034BT
To register your original color
D
Start the RGB coordinate
r
Panel
CoJ~
RGe
Coordi~Dt.
Ad uat -
<~t:'<\
',.~ . . Ridgeview RO_8d___
99999.99.
D
Adjust each color value
[] Selects a preset number to register.
[Red Value] Adjusts the Red value.
[Green Value] Adjusts the Green value.
[Blue Value] Adjusts the Blue value.
D
Select a Preset number to register
Adjusted color is registered to the selected
Preset button.
D
Complete the color coordination
#
m
~ ~1!!~geview~_08_d
. 99999