Screen Adjustment; Registering Bluetooth Unit - Kenwood DNX9140 Instruction Manual

Screen Adjustment
You can adjust the screen mode of the monitor.
D
Display the Screen Adjust screen
Touch [0]
>
[$--]
>
[Display]
>
[Screen
Adjust]. (page 66)
D
Set each item
[Bright] Brightness Control
[Contrast] Contrast Control
[Black]
Black Level Adjustment
[Dimmer] Dimmer Mode Setup
"ON": The display dims.
"OFF": The display doesn't dim.
"SYNC": Turning the Dimmer function On or
Off when the vehicle light control
switch is turned On or Off.
"NAV-SYNC": Turning the Dimmer function
On or Off according to the
Navigation Day/Night display
setting. (DNX9140 only)
~
~
In this Screen Adjust screen, you can perform setups for
the menu screen. Setups for videos such as DVD can be
performed on the <Screen Control> (page
50).
Registering Bluetooth Unit
Registers the Bluetooth unit to be connected.
D
Display the Bluetooth Setup screen
Touch
[0]
>
[$--]
>
[Bluetooth SETUP].
(page 66)
D
Display the Connect Device List screen
D
Search for a Bluetooth unit
OJ
Displays the registered Bluetooth units.
The busy service becomes active. The available
service becomes inactive.
[ .. ] When .. appears, the text display is
scrolled by touching it.
[Search] Searches for a Bluetooth unit.
[SP DEV] Registers a Bluetooth unit that
cannot be registered
by
normal register
(pairing) operation.
e
A new device cannot be registered if there are
already 5 Bluetooth units registered. Delete
unnecessary registration. See <Bluetooth Unit
Connection> (page
77).
Nextpage.
English 75