User Interface; Language Setting - Kenwood DNX9140 Instruction Manual

Setup Menu
User Interface
You can setup user interface parameters.
D
Display the User Interface screen
Touch [e]
> [....]>
[System]
>
[User
Interface). (page 66)
D
Set each item
[Beep] Turns the key touch tone On or Off.
([2]
"ON")
[Remote Sensor] Selects a remote control
signal.
([2]
"ON")
When turned "OFF", the remote control ofTV
reception is rejected.
[Language] Select the language used for the
control screen and setting items. (page 68)
[Scroll] Allows scrolling of text display on the
Source Control screen. ([~l "Auto")
"Auto": Scrolls the screen automatically.
"Manual": Allows you to scroll the screen
manually.
[Marker] Sets whether to display the target
when touching the panel.
([2]
"ON")
[Drawer Close] Sets whether to close the
function bar automatically.
([2]
"Auto")
[AUD Key Longer than 1 Second] Sets the
function of the [AUD] button. (page 10)
([2]
"R-CAM")
''V.OFF'' : Press the [AUD] button for more than
1 second to turn the display off.
"R-CAM" : Press the [AUD] button for more
than 1 second to switch to rear view.
(Animation] Sets whether to display
animation.
(ill
"ON")
68 DNX9140/DDX814/DDX8034BT
Language Setting
You can select the display language for the
control screen and audio file tags.
D
Display the User Interface screen
Touch
[e]
> [....]>
[System]
>
[User
Interface]. (page 66)
D
Display the Language Setting screen
D
Select a language
[ASR] Selects whether to use the voice control
function. (page 47)
([2]
"Disabled") (DNX9140
only)
"Enabled": Voice control is activated.
"Disabled": Voice control is deactivated.
[Language Select] Selects a language.
([2]
"American English")
[Enter] Determines the selected language.
[Cancel] Cancels the selected language.
When [ASRj is set to "Disabled" (DNX9140
only)
[GUI Language Select] Selects the display
language used for the control screen and so
forth.
([2]
"American English")
[Navigation Language Select] Selects the
language used for navigation.
([2]
"American English")