Initial Setup - Kenwood DNX7230BT Instruction Manual

Initial setup

Perform this setup when you use this unit first time or when you reset the unit (P.109).
1
Set each item as follows.
Language
Select the language used for the control screen and setting items. Default is "British English (en)".
1 Touch [SET].
2 Touch [2] or [3] to select the desired language.
3 Touch [Enter].
For detailed operation, see Language setup
Angle
Adjust the position of the monitor. Default is "0".
1 Touch [SET].
2 Touch desired angle number and [
For detailed operation, see Monitor angle control
iPod AV Interface Use
Set the terminal which your iPod is connected to. Default is "iPod".
1 Touch [iPod] or [AV-IN2].
AV-IN SETUP (DNX4230TR)
Select the source connected to AV-IN.
1 Touch [SET].
2 For AV-IN Interface, touch [Rear Camera] or [AV-IN] to select the source.
3 For AV-IN Name, touch [2] or [3] to select the name.
Select the source connected to AV-IN2.
1 Touch [SET].
2 For AV-IN2 Interface, touch [iPod] or [AV-IN2] to select the source.
3 For AV-IN2 Name, touch [2] or [3] to select the name.
For detailed operation, see AV Input Setup (P.88)
(P.79).
].
(P.82).
(DNX4230DAB, DNX4230BT)
Return to the Top page
Basic Operations
Continued
13