Sleep Switch - NEC Express5800 140Rd-4 User Manual

SLEEP Switch

T he SLEEP switch allows you to
NOTE:
To use the SLEEP switch, an operating system supporting the sleep feature is required.
(Available for Windows 2000 and Windows 2003)
Press the SLEEP switch on the front of the server to place th
blinks.) In the power-saving mode, the server retains the memory
To resume the original state, press the POWER switch. (It may take
NOTE:
The operational level in the power-saving mode depends on the operating system in use.
(Available for Windows 2000 and Windows 2003.)
IMPORTANT:
in the power-savi
save almost all power of the server (power-saving mode or sleep mode).
e server in the power-saving mode.
Do not change system configuration while turning into the power-saving mode or
ng mode. Otherwise, you may fail to resume the original state.
POWER/SLEEP lamp
SLEEP switch
data and the status of the previo
a little time to resume the origi
2-27
(The POWER/SLEEP lamp
us operations.
nal state.)