D-6
Updating the System
To ensure normal system operation you should update your system using the following procedures.
1.
Logon to the system using the administrator account or other account which is a member of the Administrators
group.
2.
Insert the EXPRESSBUILDER CD-ROM into the CD-ROM drive.
Master Control Menu is automatically appeared on the screen.
3.
Click [Setup] with left mouse button and click [Update Express5800 system] section.
4.
Continue your work for system update as the following message.
5.
Click [Restart Computer] to restart the system.
6.
Remove the EXPRESSBUILDER CD-ROM from the CD-ROM drive immediately after clicking [Restart Computer]
IMPORTANT: If you change the configuration of the system (by adding or removing hardware or
Operating system software components) or repair the system, you must run the system update
again.