NEC Express5800 140Rd-4 User Manual page 165

Network Driver
Specify the details of network driver.
Two standard network drivers that are mounted will be installed automatically, but the link speed and Duplex mode need to be
specified manually.
[When PROSet is not installed]
1.
The [Local Area Connection Properties] dialog box appears.
* Procedure in the case of the standard start menu
1. Click Start menu, Click [Control Panel], Click [Network Connections], and Click [Local Area Connection].
* Procedure in the case of the classic start menu
1. Click Start menu, Click [Settings] and Click [Network Connections].
The [Network Connections] dialog box appears.
2. Right-click [Local Area Connection] and click [Properties] from pop-up menu.
2.
Click [Configure].
The property dialog box for network adapter appears.
3.
Click the [Advanced] and specify the [Link Speed & Duplex] value the same as the value specified for HUB.
4.
Click [OK] on the property dialog box for network adapter.
[When PROSet is installed]
1.
The [Intel PROSet] dialog box appears.
* Procedure in the case of the standard start menu
Click Start menu, point to [Control Panel] and click [Intel PROSet].
* Procedure in the case of the classic start menu
1. Click Start menu, point to [Settings] and click [Control Panel].
2. Double-click [Intel(R) PROSet] on the [Control Panel] window.
2.
Click [(Network Adapter Name)] in the list.
3.
Click the [Speed] and specify the [Link Speed & Duplex Settings] value the same as the value specified for HUB.
4.
Click [Apply] and click [OK].
Specify the other network driver with the same process as above.
Also, add or delete any protocols and services if necessary.
You can operate the process on the property dialog box for local area network which can be appeared from [Network and
Dial-up Connection].
NOTE: We recommend you to add [Network Monitor] at [Adding Services]. [Network Monitor]
can monitor the frame (or the packet) that the computer installing [Network Monitor] sends or
receives. This tool is valuable when analyzing network trouble. For information on how to install
the tool, see the "Setting for Solving Problems" described later in this chapter.
Optional Network Board Driver (INTEL PRO/100+ - Intel Pro/1000 + - Intel Pro/1000 MT Dual – Intel
Pro/1000 MF)
If you want to utilize optional Network Board, install the network driver stored in EXPRESSBUILDER CD-ROM.
In case of utilizing Intel Pro/1000 + - Intel Pro/1000 MT Dual – Intel Pro/1000 MF
"CD-ROM Drive Letter:\WINNT\DOTNET\BC5\PRO1000\WS03XP32"
In case of utilizing INTEL PRO/100+
"CD-ROM Drive Letter:\WINNT\DOTNET\BC5\PRO100\WS03XP32"
5-11