NEC Express5800 140Rd-4 User Manual page 23

Do not connect any interface cable with the power cord of the server plugged to a power source.
Make sure to power off the server and unplug the power cord from a power outlet before
installing/removing any optional internal device or connecting/disconnecting any interface cable to/from
the server. If the server is off-powered but its power cord is plugged to a power source, touching an
internal device, cable, or connector may cause an electric shock or a fire resulted from a short circuit.
Do not use any unauthorized interface cable.
Use only interface cables provided by your manufacturer and locate a proper device and connector before
connecting a cable. Using an authorized cable or connecting a cable to an improper destination may
cause a short circuit, resulting in a fire.
Also, observe the following notes on using and connecting an interface cable.
Do not use any damaged cable connector.
Do not step on the cable.
Do not place any object on the cable.
Do not use the server with loose cable connections.
CAUTION
1-7