NEC Express5800 140Rd-4 User Manual page 115

IMPORTANT:
form hardware channel number printed on the controller board.
Channel number printed on the board
Channel number displayed on MCU
6.
When the hard disk is selected, press Enter to fix the selection (blinking stops.)
7.
Press F10 to create logical drive. The "Logical Drives Configure" screen appears.
8.
Select "RAID," "Size" or "Advanced Menu" by using cursor keys. Then press Enter to fix the selection and set each
value. Selecting "Advanced" displays the Advanced screen.
– "RAID": Sets RAID level.
Parameter
0
1
5
The selectable RAID level varies depending on the number of hard disks that configure a pack.
– "Size": Sets logical drive size.
Up to 40 logical drives can be created per disk array controller.
The channel number displayed on MegaRAID Configuration Utility is different
Remarks
-
-
-
CH0 CH1
Channel-1 Channel-2
4-33