HP 3PAR StoreServ 7200 2-node Service Manual page 55

5. After the node has booted, verify that the node status LED is blinking green in unison with the
other node LEDs, indicating that the node has joined the cluster, then press Enter to continue.
6. Select the following:
1 Deconfigure <name of cluster> Node Rescue
x to return to return to the main menu
7 Interactive CLI for an InServ, then select the desired system
7. Issue the following commands:
shownode to verify that all nodes have joined the cluster.
cli% shownode
Node Name -State- Master InCluster --LED-- Mem(MB) Mem(MB) Available(%)
2 1201553-2 OK
3 1201553-3 OK
checkhealth -svc -detail to verify that the system is healthy.
8. Click the SPMAINT menu button, then click Sign Out.
No Yes GreenBlnk
Yes Yes GreenBlnk
Control Data Cache
4096 12288 100
4096 12288 100
Service Processor (Physical) Node Rescue 55