HP 3PAR StoreServ 7200 2-node Service Manual page 49

1 for Update SP Software Revision
2 for CDROM to install the files.
NOTE: The installation process takes approximately five minutes.
4. When prompted to update the SP, verify that the software version is correct. Type y and press
Enter to continue with the update process.
Mounting CDROM...
Using spinstaller from /sp/sw/sp/2.5.1.GA-15/
tpdSPInFormOS3.1.2.226-3.1.2.226-12.i386.rpm
Do You wish to update the SP from /mnt/cdrom?
(y or n)
y
5. When the installation process completes, the SPMAINT main menu reappears. To verify the
current software versions after installation, type 1 for SP Control/Status.
1 SP Main
Transfer media: ethernet
Enter Control-C at any time to abort this process
1 ==>
2 ==>
3 ==>
4 ==>
5 ==>
6 ==>
7 ==>
X Exit
1
6. Type 1 for Display SP Version to verify installation is complete.
1.1
SP Software Version
SP-4.1.0.GA-97
SP Base Image Version:
(Santiago)
SP Version:
SP Patches:
InFormOS release (3.1.2):
More detail is available in the latest SPLOR or spconfig data.
Press to continue
Continue to "Adding a Storage System to the Service Processor" (page
3PAR Service Processor Menu
Transfer status: Ok
SP Control/Status
Network Configuration
InServ Configuration Management
InServ Product Maintenance
Local Notification Configuration
Site Authentication Key Manipulation
Interactive CLI for an InServ
Display SP Version
Red Hat Enterprise Linux Server release 6.1
4.1.0.GA-97
3.1.2.370
50).
Installing HP 3PAR OS Files 49