HP 3PAR StoreServ 7200 2-node Service Manual page 47

NOTE: The system name can include only letters, numbers and the special characters ".-_",
(dot, hyphen, underscore) and can be no more than 31 characters long. The first character
in the sequence must be a letter or number.
Enter the InServ system name ==> <systemname>
Cluster will be initialized with the name <systemname>
IS THIS THE CORRECT NAME?
Cluster is being initialized with the name <systemname> ...Please Wait...
8. Verify the OS version is correct. Type c and press Enter to continue.
Patches: None
Component Name
CLI system
CLI Client
System Manager
Kernel
TPD Kernel Code
Enter < C > to continue or < Q > to quit
9. Verify the number of drives in the storage system. Type c and press Enter to continue.
10. If there are any missing or nonstandard connections, an error message displays. Verify that
all nonstandard connections are correct or complete any missing connections, then type r
and press Enter to recheck the connections. If it is necessary to quit the setup procedure to
resolve an issue, type q and press Enter When all connections are correct, type c and press
Enter to continue.
1 1. The system prompts you to begin the system stress test script. Type y and press Enter. The
system stress test continues to run in the background as you complete the system setup.
At this point, it is recommended that the OOTB stress test be started.
run heavy I/O on the PDs for 1 hour following 1 hour of chunklet initialization.
The results of the stress test can be checked in approximately 2 hours and 15
minutes. Chunklet initialization will continue even after the stress test
completes. Select the "Run ootb-stress-analyzer" option from the console menu
to check the results.Do you want to start the test (y/n)? ==> y
12. When finished, type c and press Enter.
13. Create spare chunklets as directed.
CAUTION: HP recommends that at least four physical disks worth of chunklets be designated
as spares to support the servicemag command. The default sparing options create an
appropriate number of spare chunklets for the number of disks installed.
Select one of the following spare chunklet selection algorithms:
Custom allows specifying the exact number of chunklets, but is not recommended
as spares must be manually added when new disks are added.
Enter "Ma" for maximal, "D" for default, "Mi" for minimal, or "C" for custom: D
Selecting spare chunklets...
yes/change => yes
Version
3.1.2.xxx
3.1.2.xxx
3.1.2.xxx
3.1.2.xxx
3.1.2.xxx
==> c
Manually Initializing the Storage System Software
This will
47