Panasonic EASA-PHONE KX-T123210 Installation Manual page 56

Description
If you select the automatic switching mode for
day/night service, enter the starting time.
Refer to " Switching of Service Mode (Day/Night
Service Mode)" on page 3-12.
Programming
1. Dial (07).
" Day/Night Time" will be displayed.
2. Press the NEXT button.
" Day: 9:00 AM" will be displayed as a default
value and " 9" will blink.
3. Enter the starting time for day service using 1
or 2 digits.
4. Press the " +" button
" 00" will blink.
5. Enter the minutes using 2 digits.
6. Press the " q" button.
" AM" will blink.
7. Press the SELECT button to alternate between
" AM" and " PM" to select the correct setting.
8. Press the MEMORY button.
The LCD will stop blinking.
9. Press the NEXT button.
" Night : 5:00 PM" will be displayed as a
default value and " 5" will blink.
10. Enter the starting time for night service using
1 or 2 digits.
11. Press the ' i 4" button.
" 00" will blink.
12. Enter the minutes using 2 digits.
13. Press the ' I q" button.
" PM" will blink.
Conditions
If the NEXT button is pressed at step 3
through 7, the display will advance to the
" Night Time input" mode (step 9). The
operations of step 3 through 7 will not be stored.
If the PREV button is pressed at step 10
through 14, the display will return to the " day
time input" mode (step 2).The operations of
step 10 through 14 will not be stored.
Example:
8:30 AM
+tarting time for day plan
6:30 PM
.starting time for night plan
Programming Table
See page 7-4.
14. Press the SELECT button to alternate between
" AM" and " PM" to select the correct setting.
15. Press the MEMORY button.
The LCD will stop blinking.
16. To return to the initial program mode, press
the END button.
: -..
3-14